Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Cleaning & Sweep in Tacoma: What to Know First
We provide independent Olympia Chimney service in Tacoma, including Level 1 and Level 2 inspections, creosote and soot removal, and annual sweeps for Olympia Chimney stainless steel liner systems and factory-built chimney products. Most appointments are completed in 60-90 minutes, and every job starts with a written price before any work begins - Clause 1 of the Haven Standard, no exceptions. If you own an Olympia Chimney product in Tacoma, the North End, or the Proctor District and need cleaning or inspection, call us at (253) 447-5982 for a free estimate.
This page is for homeowners who need to know whether their Olympia Chimney system is safe to burn, what a proper sweep includes, and what it actually costs in Tacoma’s market.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney 316Ti stainless flex liners develop creosote packing at the collar connections where the inner wall corrugation traps condensation. In Tacoma’s marine climate, that moisture mixes with Pacific Northwest softwood sap to form tacky Class II creosote that standard brushes skate over. We use rotary polypropylene whips sized to the liner diameter, then camera-verify the collar valleys are clean.
- Olympia Chimney 304 alloy liners in pre-2015 installations show accelerated wall thinning in the smoke chamber area, especially in homes near Commencement Bay where salt air penetrates older masonry. The camera finds it; we document thickness with a borescope measurement and quote HeatShield or DuraFlex relining if the wall is below 20 mil.
- Olympia Chimney factory-built chimney systems (model 6500 series and 7500 series) collect debris at the telescoping joint between chase cover and flue cap. Squirrels love the 5/8-inch gap on 6500 units. We remove the cap assembly, vacuum the joint, and install a Gelco stainless screen if the chase cover metal is still sound.
- Olympia Chimney oval-to-round adapters on fireplace insert installations trap soot in the flat sections where flow velocity drops. This is common in Tacoma’s 1920s craftsman bungalows where the original flue is 8×12 and the insert needs a 6-inch round. We pull the adapter, hand-brush the flat faces, and check for adapter cracking from thermal cycling.
- Olympia Chimney top-sealing dampers integrated with their chase covers seize in the open position after two to three seasons of rain exposure without annual service. The stainless cable runs through a brass guide that corrodes. We clean and lubricate the guide, or replace with a Famco cast-aluminum damper if the cable is frayed.
Our Olympia Chimney Chimney Cleaning & Sweep Process
- 1
Call and schedule. A live person answers, 24/7. We ask the Olympia Chimney model or series if you know it, the appliance type, and the last service date. Corrine Halstead or a named technician is assigned, and you get a text when we’re en route.
- 2
Arrival and setup. We lay floor protection, inspect the appliance exterior, and confirm the written scope and price before entering the flue - Haven Standard Clause 1. No surprises, no “while we’re here” add-ons after we’re inside your house.
- 3
Camera-scan inspection (NFPA 211 Level 2). We run a color camera the full flue length on every visit. For Olympia Chimney liners, we pause at each collar and telescoping joint to document wall condition, creosote class, and any deformation. The camera doesn’t guess. Neither do we.
- 4
Sweep and mechanical cleaning. We select brushes or whips based on what the camera found - polypropylene for 316Ti flex, wire brush for packed 304, hand tools for oval adapters. Debris is HEPA-vacuumed, not dropped.
- 5
Post-sweep documentation. You receive photos, camera footage, a written condition summary, and a stamped warranty under the 365-Day Done Right Promise. If we found something that needs repair, the written price for that work is attached - your decision, no pressure.
- 6
Cleanup and departure. We remove protection, check draft with a manometer, and leave the work area as we found it. Payment is processed only after you’ve reviewed and approved the documentation.
Before
AfterWhat Olympia Chimney Chimney Cleaning & Sweep Costs in Tacoma
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Level 1 sweep and inspection, Olympia Chimney factory-built or liner system | $189-$279 | Roof access difficulty, creosote class (I vs. II vs. III), chase height |
| Level 2 camera inspection with sweep | $279-$389 | Number of appliances, liner length over 25 feet, need for rooftop camera entry |
| Heavy Class III creosote removal (glazed or tar-like) | Add $95-$175 | Chemical pretreatment requirement, rotary tool time, disposal |
| Olympia Chimney cap/damper cleaning and lube | $75-$145 | Seized hardware, cable replacement, chase cover detachment required |
| Smoke chamber hand-cleaning with oval adapter service | $145-$225 | Adapter removal difficulty, refractory panel access |
Every price is written and agreed before work starts. Estimates are free. Call (253) 447-5982 for an exact quote on your Olympia Chimney system.
Why Tacoma Homeowners Call Level Two Chimney Tacoma for Olympia Chimney Work
We’ve cleaned and inspected more than 38,000 chimneys since 2009, and a growing share of Tacoma’s housing stock runs Olympia Chimney products - especially the 316Ti flex liners installed during the 2015-2022 insert boom. Corrine Halstead and her crew know the collar-connection creosote pattern, the 304 salt-air thinning issue, and which Olympia Chimney parts cross-reference to DuraFlex, HeatShield, or Gelco when OEM lead times stretch past burning season.
Our background-checked, uniformed technicians carry license information on every page of every invoice. The 365-Day Done Right Promise covers every job. And if another company handed you a written estimate for Olympia Chimney work that feels high or vague, we offer a free second opinion - bring us their paperwork, we’ll camera-inspect and price it independently.
We source materials through Haven’s buying network to keep customer prices honest, whether the job needs Olympia Chimney OEM or quality aftermarket from Famco or Copperfield.
FAQs
No. Annual professional sweeping is required under Olympia Chimney’s warranty terms, provided the service is documented. We include a written service record and photo documentation with every visit - exactly what warranty claims ask for. As an independent Olympia Chimney service provider, we follow manufacturer maintenance specs without being bound to their parts pricing. Call (253) 447-5982 if you need documentation for a warranty filing.
Once per burning season for wood-burning appliances, per NFPA 211. In Tacoma’s wet climate, we often find heavier creosote buildup than inland markets due to slower draft warm-up and higher ambient moisture. Olympia Chimney 316Ti liners resist corrosion but don’t resist creosote accumulation - the smooth inner wall helps, but collar connections still need annual attention. Call us for a free condition check if you’re unsure when it was last done.
We stock common Olympia Chimney service parts and can source OEM or quality aftermarket equivalents through our Haven network, typically within 2-4 business days. For discontinued 304 liner sections, we cross-reference to DuraFlex or HeatShield solutions that meet or exceed original specs. We never ask a customer to source their own parts - the written price includes everything needed.
Smoke spillage usually indicates a draft or blockage problem, not necessarily liner failure. We camera-inspect first: packed creosote, a displaced oval adapter, or a seized top damper are common on Olympia Chimney insert systems and are cleaning or adjustment fixes. If the liner is cracked or the smoke chamber is severely degraded, we’ll show you the camera footage and quote repair separately - no work proceeds without written approval. Call (253) 447-5982 to schedule a Level 2 inspection.
Most appointments run 60-90 minutes from arrival to documentation. Heavy Class III creosote, multiple appliances, or rooftop access complications in Tacoma’s steeper North End neighborhoods can extend that. We don’t rush the camera scan - Clause 4 of the Haven Standard requires documented photo record on every job, and that takes the time it takes. You’ll know the expected duration when we confirm your appointment.
Written by Corrine Halstead, Owner, Level Two Chimney Tacoma at Level Two Chimney Tacoma, serving Tacoma and nearby areas.