Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterTrusted Chimney Repair for Tacoma Homeowners
Chimney repair in Tacoma typically costs $350 to $4,500 depending on scope, with most mortar repointing and flashing jobs running $350-$1,800 and full rebuilds reaching the upper end. Most repairs are completed in one to three days after we deliver a written price and scope. Call (253) 447-5982 for a free estimate with camera inspection included.
We’ve inspected and repaired chimneys across Tacoma since 2009 - more than 38,000 total visits, every one with a written price before work started and a documented photo record when finished. Tacoma’s wet winters and marine climate punish masonry differently than drier inland markets. Water finds hairline cracks in the crown, freezes in January, and opens them into spalling brick by March. In neighborhoods like North End and Proctor, we regularly see 1920s chimneys with original lime mortar that’s simply washed out after a century of Pacific Northwest rain. In newer construction around South Hill and Spanaway, we’ve found premature crown failure where builders used the wrong mortar mix for freeze-thaw cycling.
Level Two Chimney Tacoma operates under the Haven Standard, which we helped develop. That means Clause 4 documentation - camera down the flue, photos of every defect, written scope, written price, written warranty - on every job, not as an upsell. Corrine Halstead leads our local operation. Our technicians are background-checked, uniformed, and named before they arrive. You’ll get a text when they’re on the way, and a live person answers our phones 24 hours a day.
What Our Chimney Repair Service Includes
Mortar Repointing
Mortar repointing is the process of grinding out deteriorated mortar between bricks and packing new, matched mortar into the joints. You need it when the mortar has eroded to a depth greater than the width of the joint, or when you can scratch it out with a house key - both conditions we check during our NFPA 211 Level 2 inspection. In Tacoma, we see accelerated mortar decay in homes within two miles of Puget Sound where salt air accelerates chemical breakdown; we specify Type N or Type O mortar matched to the original, never Portland-heavy mixes that trap moisture and speed spalling. Every repointing job includes crown assessment and flashing inspection, because new mortar fails fast if water still enters from above.
Spalling Brick Repair
Spalling is when the face of a brick flakes or pops off due to water trapped inside freezing and expanding. You need repair when the spall exceeds 1/4-inch depth or affects more than 10% of the chimney’s surface area, at which point structural integrity and water intrusion accelerate. In Tacoma’s North End and Stadium District, we regularly replace spalled bricks in chimneys built before 1940 where the original clay was soft and porous; we source matching brick through Olympia Chimney’s regional network when possible, or document the closest match with photos for your approval. We never paint over spalling - that traps more moisture. We remove the damaged course, install a proper through-wall flashing if missing, and rebuild with weep holes that let the wall breathe.
Chimney Waterproofing
Chimney waterproofing is the application of a vapor-permeable silane/siloxane sealant to masonry surfaces, plus targeted flashing and crown repair. You need it when your brick absorbs water (we test with a simple splash test during inspection) or when you’ve had interior water staining despite functional gutters and roof. Tacoma’s 39 inches of annual rainfall and frequent wind-driven rain from the southwest make waterproofing particularly valuable for chimneys on the exposed west and south faces of homes in West End and Ruston. We use HeatShield-compatible breathable sealants that don’t trap moisture inside the masonry, and we always repair crown cracks and deteriorated flashing before sealing - sealing over active leaks is money wasted. Our waterproofing includes a five-year performance warranty against water penetration through treated masonry.
Flashing Repair
Flashing is the sheet metal interface where your chimney penetrates the roof, designed to shed water away from the joint. You need repair when you see rust stains on the roof, water stains on the ceiling near the chimney, or gaps where the flashing has pulled away from the masonry or lifted from the shingles. Tacoma’s combination of heavy rain and occasional snow load causes step flashing to work loose, especially on older homes in Hilltop and McKinley where original flashing was often single-piece rather than integrated with the roofing courses. We fabricate custom flashing from 26-gauge galvanized steel or copper, integrate it properly with the roofing underlayment, and seal the masonry interface with a flexible urethane sealant rated for Pacific Northwest temperature swings. Every flashing repair includes a water test - we run a hose at the joint for ten minutes and check the attic with you if accessible.
Chimney Rebuilding
Chimney rebuilding is partial or complete demolition and reconstruction of the chimney structure, from the roofline up or from the foundation. You need it when structural lean exceeds 1/2-inch per 10 feet of height, when more than 30% of bricks are spalled or the liner is displaced, or when a seismic event has compromised the structure - conditions we document with photos and measurements during our camera inspection. In Tacoma, we’ve rebuilt chimneys in the Proctor District after the 2001 Nisqually earthquake left hidden fractures, and we’ve done full rebuilds in Lakewood and Midland where decades of deferred maintenance made repair uneconomical. Our rebuilds use materials sourced through Haven’s buying network from Olympia Chimney and Famco, with engineered drawings when height exceeds 30 feet or when the chimney serves multiple appliances. You get a written scope, staged payment schedule, and final documentation package with photos, flue liner video, and warranty.
Tuckpointing
Tuckpointing is a specialized cosmetic and protective technique where two contrasting mortar colors are used - one matching the brick, one matching the original mortar - to create the appearance of fine, precise joints. You need it when the aesthetic condition of the chimney matters for property value or historic preservation, or when standard repointing would leave wide, visible joints on a finely finished facade. Tacoma’s historic districts, particularly in North End and the Stadium area, have chimneys where original tuckpointing from the 1910s-1930s has weathered away, exposing the rougher backing mortar. We match the original sand aggregate and pigment profile through analysis of intact sections, then reproduce the two-line technique with proper joint profiles. Tuckpointing costs more than standard repointing, but on a prominent chimney visible from the street, the difference in appearance is significant. We document the color match with wet and dry samples for your approval before we start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Chimney Repair
We repair and rebuild with materials from the manufacturers that professional sweeps trust. We’ve installed hundreds of HeatShield cerfractory flue liner resurfacing systems in Tacoma-area homes where the original clay liner is cracked but structurally sound - a repair that costs 40-60% less than full liner replacement and carries a 20-year warranty when applied to our surface preparation standard. Our technicians are trained in HeatShield’s mixing, application, and curing protocol, and we document thickness with a borescope after every job.
We source stainless steel chimney liners, caps, and components from Olympia Chimney and Famco through Haven’s buying network, which means we don’t mark up materials to compensate for discounted labor. For crown repair and resurfacing, we use Gelco crown seal products formulated for freeze-thaw resistance in marine climates. Whether your chimney has a Gelco cap, an Olympia Chimney liner, or original 1950s clay tile with no branding at all, we can inspect it, document its condition, and recommend repair or replacement with specific part numbers and prices in writing.
Before
AfterSigns You Need Chimney Repair Right Now
- White efflorescence on brick faces. This powdery deposit is minerals left behind when water moves through masonry and evaporates. It means water is getting in, dissolving salts, and exiting - and every cycle weakens the mortar and brick. In Tacoma, we see heavy efflorescence on chimneys with failed crowns or missing cap flues, especially after our wet November through February season.
- Cracked or missing chimney crown. The crown is the concrete or mortar cap that sheds water off the top of the chimney. When it’s cracked, water enters directly into the chimney core, saturating the liner surround and accelerating freeze-thaw damage to the entire structure. We replace crowns with poured concrete minimum 2-inch thickness at the edge, sloped 1/4-inch per foot, with an overhang and drip edge - not the flat wash coats that fail in two years.
- Rust stains on the exterior or interior firebox. Rust means moisture is reacting with metal components - the damper, fire grate, or hidden steel structural elements. On a gas appliance, rust in the firebox can indicate a condensation problem that also produces carbon monoxide. We inspect the flue and appliance with a camera to find the moisture source before we quote repair.
- Smoke entering the room during use. This can indicate a blocked flue, but it can also mean a cracked flue liner or deteriorated smoke chamber that’s leaking combustion gases into wall cavities. Both conditions create fire and carbon monoxide hazards. We run a Level 2 camera inspection to distinguish between a sweepable blockage and a repair-needed breach.
- Visible leaning or separation from the house. A chimney that tilts away from the structure has compromised foundation support, corroded steel tie straps, or both. This is a structural safety issue - the chimney can collapse in a seismic event or under its own weight. We measure lean with a laser level, inspect the footing if accessible, and quote stabilization or rebuild with engineered drawings when required by Tacoma building code.
Our Chimney Repair Process - Step by Step
- 1
Schedule your NFPA 211 Level 2 inspection. Call (253) 447-5982 and speak with a live person, any time. We’ll book a two-hour window that works for you, assign a named technician, and text you when they’re en route. There’s no charge for the estimate visit, and no obligation - we inspect, document, and deliver a written price; you decide.
- 2
Camera-scan inspection and documentation. Your technician runs a high-resolution camera down the full length of the flue, photographs the exterior from roof level, and documents mortar joint condition, crown integrity, flashing detail, and any spalling or efflorescence. This is Clause 4 of the Haven Standard - the photo record that became our standard practice in 2009 and is now required by most insurers for claim documentation.
- 3
Written scope, written price, written warranty. Within 24 hours, you receive a detailed proposal: what we found, what we recommend, what it costs, and what warranty applies. For chimney repair, this includes material specifications (brick type, mortar mix, flashing gauge, sealant product), labor hours, and permit requirements if applicable. No work starts until you approve in writing - Clause 1 of the Haven Standard.
- 4
Repair execution with progress documentation. For multi-day jobs, your technician sends photos of progress at end of day. For all jobs, we protect your property with drop cloths, ventilate work areas for dust control, and keep the work site clean. Corrine Halstead reviews every job file for documentation completeness before final billing.
- 5
Final inspection, photo record, and warranty registration. We re-inspect with the camera after repair, deliver a final photo package showing before and after conditions, and register your 365-Day Done Right Promise. If anything isn’t right - workmanship, materials, or documentation - we make it right. That’s stamped on every job, not offered as an afterthought.
How Much Does Chimney Repair Cost in Tacoma?
Here’s how much Chimney Repair costs in the Tacoma market, based on jobs we’ve completed in 2023-2024:
| Repair Type | Typical Range | What Drives Price |
|---|---|---|
| Mortar repointing (typical chimney) | $350 - $1,200 | Height, accessibility, mortar type match |
| Spalling brick repair (partial) | $500 - $2,000 | Number of bricks, source matching, scaffolding |
| Chimney waterproofing | $400 - $900 | Surface area, prep cleaning, crown/flashing repair included |
| Flashing repair | $450 - $1,800 | Roof pitch, material (galvanized vs. copper), extent of decking repair |
| Crown repair or rebuild | $600 - $2,500 | Size, pour vs. precast, reinforcement needs |
| Tuckpointing (historic) | $1,200 - $3,500 | Joint count, color matching complexity, scaffold access |
| Partial chimney rebuild (roofline up) | $2,500 - $6,000 | Height, liner work, matching requirements |
| Full chimney rebuild | $4,500 - $12,000+ | Height, foundation, liner, appliance connections, permits |
Three factors move price within these ranges. First, access: a two-story chimney on a steep roof in North End costs more to scaffold safely than a single-story ranch in South Tacoma. Second, material matching: we can source standard brick and mortar locally for most post-1960 homes, but 1920s Tacoma brick with specific iron spotting or 1930s salmon-colored mortar requires special order or custom blending. Third, what we find when we open the wall: a chimney that looks sound from outside can have a rusted-out smoke chamber, displaced liner, or rotted framing behind it - conditions we document with the camera before we quote, not after we start.
To avoid overpaying, get any competitor’s written estimate in hand and bring it to us for a free second opinion. We’ll review their scope against what our camera found, point out differences in material specification or warranty terms, and give you our written price for the same or corrected scope. We’ve found estimates that specified standard mortar for a historic chimney, or omitted liner inspection on a chimney with known drafting problems. The lowest price isn’t the best price if it doesn’t solve the problem.
Every estimate from Level Two Chimney Tacoma includes the camera inspection, written scope, and documentation package at no charge. Call (253) 447-5982 to schedule.
Chimney Repair Near Tacoma - Our Service Area
We repair chimneys throughout the Tacoma metro and surrounding communities: Midland, Milton, Federal Way, Lakewood, Gig Harbor, Puyallup, Sumner, Des Moines, Auburn, South Hill, and Normandy Park. Most repair estimates are scheduled within three to five business days, with priority booking available for active water intrusion or structural concerns. In Lakewood and Puyallup, we typically route same-week; for Gig Harbor and the Key Peninsula, we coordinate to minimize ferry schedule impact on arrival windows. Wherever you are in Pierce County or south King County, the process is identical: camera inspection, written price, documented record, 365-Day Done Right Promise.
Serving Tacoma, WA - Our Local Coverage Area
We’re based in the Tacoma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Chimney Repair in Tacoma
Chimney repair fixes structural and functional defects in the chimney system - masonry, liner, crown, flashing, or foundation - while a chimney sweep removes combustible deposits from the flue. You can need both: we often find repair needs during a sweep inspection, and we always sweep the flue before installing a new liner or doing crown work. Call (253) 447-5982 and we’ll recommend the right starting point based on your chimney’s age and condition.
Most single repairs - repointing, flashing, crown work - are completed in one day. Multi-course spalling repair or tuckpointing typically takes two days. Partial rebuilds run two to four days; full rebuilds with permits one to three weeks depending on Tacoma’s permit turnaround and weather. We give you a specific day count in your written scope, not a range, and we don’t start until materials are on hand.
Typical repairs run $350 to $2,500, with most homeowners paying between $600 and $1,400 for crown, flashing, or repointing work. Full rebuilds start around $4,500. Your exact price depends on what the camera reveals, access difficulty, and material matching requirements. We deliver a written, itemized price before any work begins - no surprises. Call (253) 447-5982 for a free estimate with inspection included.
Yes. We’re trained in HeatShield cerfractory resurfacing and install Olympia Chimney stainless steel liners and components regularly. We also repair and replace Gelco caps and crowns. If your chimney has one of these brands, we can source matching parts through Haven’s buying network and warranty the installation. If you’re not sure what you have, we’ll identify it during inspection and document it in your photo record.
We answer calls live 24 hours a day, 7 days a week, and we prioritize active water intrusion, structural instability, or post-fire damage. For true emergencies - a chimney struck by vehicle, partial collapse, or active interior water flooding - we can often inspect same-day and implement temporary stabilization. For non-emergency repairs, we book within three to five business days. Call (253) 447-5982 and we’ll triage your situation directly.
Every repair is backed by our 365-Day Done Right Promise: if it’s not done right, we make it right, period. Specific materials carry additional manufacturer warranties - HeatShield resurfacing is 20 years, Gelco crown seal is 10 years, Olympia Chimney stainless liners are lifetime. We register all warranties in your name and include the documentation in your final packet. Haven Standard Clause 1 requires the written warranty before work starts, so you know exactly what’s covered.
Clear a path from your driveway to the fireplace or chimney access, remove fragile items from mantels and walls that might vibrate during masonry work, and ensure pets are secured. For roof-access repairs, we bring our own ladders and scaffolding; you don’t need to provide equipment. If we’re doing interior work, we’ll lay protection and seal the work area for dust control. We’ll confirm any specific prep when we deliver your written scope. Call (253) 447-5982 to get started.
Schedule Your Chimney Repair Service in Tacoma Today
Call (253) 447-5982 any time - day, night, weekend - and a live person will book your free estimate with NFPA 211 Level 2 camera inspection. You’ll get a named technician, a text when they’re on the way, and a written price before anyone starts work. Corrine Halstead and the team at Level Two Chimney Tacoma have documented every job since 2009, and we back every repair with the 365-Day Done Right Promise. No obligation, no pressure, no surprises.
Written by Corrine Halstead, Owner at Level Two Chimney Tacoma, serving Tacoma, Midland, Milton, and surrounding communities since 2009.