HeatShield Chimney Cap & Crown Nationwide

HeatShield Chimney Cap & Crown in Tacoma: What to Know First

We provide independent HeatShield chimney cap and crown service in Tacoma, with most jobs quoted same-day and completed within a week. A written price, written scope, and written warranty land in your inbox before any work starts - no exceptions, no surprises. If you own a HeatShield flue liner system and need cap replacement, crown repair, or multi-flue coverage, we inspect with a camera down the flue, document what we find, and tell you exactly what it’ll cost. Call (253) 447-5982 to book. We serve homeowners across Tacoma, from the Proctor District’s 1920s craftsmans to newer builds in Northeast Tacoma where HeatShield Cerfractory Foam liners were spec’d during the 2015-2019 construction wave.

Call (253) 447-5982

How HeatShield Products Fail - and How We Fix Them

• HeatShield Cerfractory Foam liner systems (TJ-02 and TJ-04 series) with factory-issued stainless caps: The cap’s 304-grade mesh deforms faster than expected in Tacoma’s salt-air environment, especially within two miles of Commencement Bay. We see the mesh collapse inward, blocking draft and letting moisture pool on the crown. We replace with a 316-grade marine-spec cap from our Haven buying network, or source OEM HeatShield if the homeowner prefers, and reseal the crown with a compatible silane-siloxane blend formulated for Puget Sound freeze-thaw cycles.
• TJ-06 Multi-Flue systems with integrated factory caps: The welded seam between cap sections cracks where Tacoma’s winter temperature swings stress the metal - we’ve measured 40-degree shifts in a single January afternoon. Water enters, freezes, and spalls the crown concrete from below. We fabricate a custom multi-flue cap with expansion joints at the seam points, or install a Gelco multi-flue unit if the flue spacing allows, always photographing the crown substrate before and after under Haven Standard Clause 4.
• Cerfractory Foam crowns coated with HeatShield’s factory acrylic sealant: The sealant cures harder than the substrate beneath it; after three to five Tacoma winters, thermal cycling causes it to check-crack and trap water. The foam underneath stays sound, but the crown surface looks catastrophic. We strip the failed acrylic, assess the foam integrity with a moisture meter, and recoat with a vapor-permeable crown seal that lets the substrate breathe - never another hard-shell coating that repeats the same failure.
• Retrofit cap installations on older TJ-01 liners: The original TJ-01 was shipped without a cap in many 2009-2013 installations, and aftermarket caps installed by roofers often use universal mounting legs that don’t account for HeatShield’s slightly larger flue collar diameter. The cap sits cockeyed, gaps open, and squirrels get in. We measure the collar with a digital caliper, order or fabricate a cap with the correct leg spread, and secure with stainless tapcon anchors into the crown - not roofing screws that back out in six months.
• Crown wash failures on HeatShield relined chimneys in North Tacoma hillside homes: These properties get driving rain from the southwest that standard crown slopes can’t shed fast enough. The crown wash erodes, exposing the liner top to saturation, and we’ve found TJ-series liners with water marks six feet down the flue. We reshape the crown to a steeper pitch, apply a polymer-modified crown coat, and install a larger overhang cap with a 4-inch skirt - the camera footage shows the water path before we start, and the after photos show where it now runs clear.

Our HeatShield Chimney Cap & Crown Process

1. 1
   Booking and dispatch: You call (253) 447-5982, a live person answers, and we schedule your NFPA 211 Level 2 inspection. You get a text when your tech is en route, with their name and photo.
2. 2
   Camera inspection and documentation: We run the camera down the flue to the smoke chamber, recording liner condition, cap-to-crown interface, and any moisture intrusion points. Clause 4 of the Haven Standard requires this photo record on every job - we started that practice in 2009, and we don’t skip it now.
3. 3
   Written price and scope: Before any tool touches your chimney, you receive a written price, written scope of work, and written warranty terms. This is Haven Standard Clause 1: “Have it in writing.” No verbal estimates, no “we’ll figure it out as we go.”
4. 4
   Parts decision: We show you OEM HeatShield options and equivalent-quality alternatives from our Haven buying network - DuraFlex, Gelco, Olympia Chimney - with the price difference stated in dollars. You choose; we don’t choose for you.
5. 5
   Repair and testing: We complete the cap or crown work, then run a draft test and final camera pass to confirm the seal and liner integrity. The second camera run is included, not extra.
6. 6
   Documentation and guarantee: You receive the completed photo record, test readings, and the 365-Day Done Right Promise stamped on your invoice. If it’s not done right, we make it right.

Before

After

What HeatShield Chimney Cap & Crown Costs in Tacoma

Steep roofs, buried flues in Proctor District attics, or North Tacoma hillside access can add $80-$150. We state this in the written price, not after we arrive. Every estimate is free. Call (253) 447-5982 for yours.

Why Tacoma Homeowners Call Level Two Chimney Tacoma for HeatShield Work

We’ve inspected and cleaned more than 38,000 chimneys since 2009, and a growing share of our Tacoma work involves HeatShield systems installed during the mid-2010s construction boom and subsequent relining wave. Corrine Halstead and our crew know the TJ series specs cold - the collar diameters, the foam densities, the factory sealant limitations - because we’ve crawled past them with a camera hundreds of times. When OEM parts make sense, we source through our Haven buying network at prices kept honest by volume. When a DuraFlex or Gelco equivalent outperforms the factory option for Tacoma’s climate, we say so and show you the comparison in writing. The 365-Day Done Right Promise applies to every cap and crown job, and our Free Second Opinion policy means you can bring us any competitor’s written quote for review. The camera doesn’t guess. Neither do we.

FAQs